Table of Contents
Advertisement
3. How to use Projector software – Basics -
3.1 How to use "MIU Live Viewer"
This section explains how to use the "MIU Live Viewer".
3.1.1 Install "MIU Live Viewer"
In order to use the projector with a PC for Live Mode, you will first need to install
the accompanying software on all the PCs you will be using.
Minimum PC Hardware and Software Requirements
• OS:
• Graphic Interface: DirectX 6.1a or higher;
• CPU:
• Display:
NOTE
• Set your PC's resolution to XGA or less.
• In some cases, Screen will not be displayed correctly. If the received image
resolution is larger than 1024x768, projector can display only the 1024x768
portion of the image.
• Images might not been transmitted, caused by OS version or the driver
software for Network Adaptor.
It is highly recommended that OS and the driver should be updated to the latest.
• Memory:
• Available Hard Disk Space: 10MB or higher
• Web browser:
• CD-ROM drive
• PC with PC card slot (PCMCIA Type-II) interface and IEEE802.11b/g wireless
LAN PC card or PC with USB Interface and IEEE802.11b/g wireless LAN USB
adaptor.
NOTE
• Not required for PCs with built-in 802.11g wireless LAN.
• Depending on the type of wireless network card and PC you are using, the
projector may not be able to communicate properly with your PC, even if the
PC you are using is equipped with built-in wireless LAN functionality.
Should communication problems occur, please procure a Wi-Fi certified
wireless network card.
Windows 2000 Professional Service Pack4,
Windows XP Home Edition/Professional
Video RAM 4MB or higher (8MB recommended)
Pentium III (600MHz or higher recommended)
VGA 640x480 or higher (XGA 1024x768 recommended) 65,536
simultaneous colors or higher
64MB or higher (128MB or higher if using Windows XP)
Internet Explorer® (5.5 or higher)
3. How to use Projector software – Basics -
41
Advertisement
Table of Contents
