Hitachi CP-X2 - XGA LCD Projector User Manual page 32

2. Equipment connection and network setting
2.5 Configuring and controlling the projector via a web browser (Continued)
2.5.7 Date/Time Settings (Continued)
Item
Time difference
SNTP
SNTP Server IP Address
Cycle
Click the [Apply] button to save the settings.
NOTE
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve Date and Time information from the time server and
override time settings when SNTP is enabled.
• The Internal Clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.

Configures the time difference. Set the same time difference
as the one set on your PC. If unsure, consult your IT
manager.
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
Configures the SNTP server address in IP format.
NOTE
• The address allows not only IP address but
also domain name if the valid DNS server is setup in the
Network Settings. The maximum length of host or domain
name is up to 255 characters.
Configures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Description