Software Installation Procedure - Hitachi CP-X2 - XGA LCD Projector User Manual

3. How to use Projector software – Basics -
3.1 How to use "MIU Live Viewer" (Continued)

3.1.2 Software Installation Procedure

1) Turn on the PC.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the
PC's CD-ROM drive.
4) After a moment, the Welcome to MIU Utilities
Setup dialog will appear as shown on the right.
Press [Next].
NOTE
If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as
follows:
(1) Click on the [Start] button on the toolbar and select "Run".
(2) Enter E:\software\setup.exe and then press [OK].
If software has been already installed, Uninstallation will be done. Click the
[Cancel] button, then uninstallation will be canceled. If you uninstalled the
software by miss-operation, please re-install the software from first procedure.
5) The License Agreement dialog appears. If you
accept it, press the [Yes].
6) The Choose Destination Location dialog
appears. Press [Next].
NOTE
• The C:\Program Files\MIU_Utility folder will be created and the
program will be installed into that folder. If you wish to install to a different folder,
click [Browse] and select another folder.
7) Confirm the program folder name.
If "MIU_Utility" is okay, press [Next] to
continue. If not, enter the desired folder name
and then press [Next].
42
If your CD-ROM drive is not drive E on your PC, you will need to
replace E with the correct drive letter assigned to your CD-ROM
drive.