Utilize Web Remote Control - Hitachi CP-X2 - XGA LCD Projector User Manual

Network functions

Hide thumbs Also See for CP-X2 - XGA LCD Projector:

Table of Contents

2.6 Utilize Web Remote Control

You can use your Web browser to remote control the projector once the projector

is properly configured and connected to your PC via the wireless network card or

via wired LAN.

NOTE

• Do not attempt to control the projector with the projector's remote

control and via your Web browser at the same time. Attempt to do so may

causes a projector operational error.

Open browser when it is possible to communicate with projector. Corresponding

browser is Internet Explorer 5.5 or later.

Specify http://(projector IP address)/ to start.

For example, http://192.168.1.10/

(Input this URL when IP address is not changed.)

After start up, enter your ID and password, and click [Logon]. Following window

appears as shown in Fig. 2.6.a.

Fig. 2.6.a Utility selection window for Web Remote Control

2. Equipment connection and network setting

Table of Contents

Cpx2 Cpx6