Hitachi CP-X2 - XGA LCD Projector User Manual page 48

3. How to use Projector software – Basics -
3.1 How to use "MIU Live Viewer" (Continued)
2) Start Web Remote Control (39), and click [LIVE MODE] button on Web
Remote Control to change projector mode to "MIU Live Viewer". After changing,
screen of the output monitor connected with projector turn all blue.
3) Perform following operations on "MIU Live Viewer"
(1) Click [Find] button to search communication available projector. If any
projector is not found at "Enable Device" tab, try search again after referring
section .
Display communication possible
projector like this if available as a
result of search.
(2) When communication available projector is found at 1), click the found
projector to select
Click the projector line to connect.
IP address appears in the upper
column.
48
Fig. 3.1.4.b Projector search result display (1)
Fig. 3.1.4.c Projector search result display (2)