Step1 Setting Up The Machine; Removing The Protective Parts; Loading Paper - Brother DCP-130C - Color Inkjet - All-in-One Quick Setup Manual

STEP1
Setting Up the Machine
1
1 Removing the protective
parts
1
Remove the protective tape and film covering
the scanner glass.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
2

Loading paper

You can load up to 100 sheets of 20 lb
(80 g/m
For details, see About paper in Chapter 2 of
the User's Guide.
1
Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
1
4
2
) paper.
2
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
1
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
2