Audio Connectors - Intel D815EEA Technical Product Specification

®
Intel Desktop Board D815EEA Technical Product Specification
•
Crystal Semiconductor CS4297 (A) Stereo Audio Codec:
 20-bit stereo digital-to-analog and 18-bit stereo analog-to-digital converters
 High performance 18-bit stereo full-duplex audio codec with up to 48 kHz sampling rate
 Connects to the ES1373 digital controller using a five-wire digital interface
For information about
Obtaining audio software and utilities

1.9.3 Audio Connectors

The audio connectors include the following:
•
CD-ROM (legacy-style 2-mm connector)
•
ATAPI-style connectors:
 CD-ROM
 Telephony
 Auxiliary line in
•
Back panel audio connectors:
 MIDI/Game Port
 Line out
 Line in
 Mic in
For information about
The back panel audio connectors
CAUTION
The pins on both the legacy-style 2-mm and the ATAPI CD-ROM connectors are wired to the same
inputs on the audio mixer. Do not attach CD-ROM drives to both connectors. Otherwise, the
board could be damaged.
1.9.3.1 CD-ROM (Legacy-style 2-mm) Audio Connector
A 1 x 4-pin legacy-style 2-mm connector connects an internal CD-ROM drive to the audio mixer.
For information about
The location of the legacy-style 2-mm connector
The signal names of the legacy-style 2-mm connector
34
Refer to
Section 1.2, page 16
Refer to
Section 2.8.1, page 54
Refer to
Figure 10, page 59
Table 39, page 60