Adapter For S/Pdif Back Panel Connector; Flex 6 Audio Subsystem Block Diagram - Intel BLKD865GBF Specification

Intel Desktop Board D865GBF/D865GLC Technical Product Specification
#
INTEGRATOR'S NOTE
To access the S/PDIF signal with the 5.1 Digital Shared Jack option, connect an 1/8-inch stereo
phone plug to RCA jack adapter/splitter as shown in Figure 11.
Figure 12 is a block diagram of the Flex 6 audio subsystem.
82801EB
I/O Controller Hub
(ICH5)
For information about
The front panel audio connector
The back panel audio connectors
44
Connect to
S/PDIF output
on Back Panel
1/8-inch Stereo
Phone Plug
Figure 11. Adapter for S/PDIF Back Panel Connector
AC '97 Link
Figure 12. Flex 6 Audio Subsystem Block Diagram
RCA Jack
Left Channel
(White, if colored)
Connect to 5.1
speaker system or
an S/PDIF decoder
Rear Left and Right Out
Front Left and Right Out
Center and LFE (Subwoofer) Out
AD1985
Audio Codec
Auxiliary Line In
OM16108
S/PDIF
Line In
Mic In
CD-ROM
OM16102
Refer to
Section 2.9.1, page 83
Section 2.8.1, page 69