Setting The Presentation Timer - ViewSonic Pro8600 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Go to the Setting > Presentation Timer menu and press ENTER on the projector
or Enter on the remote control to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing
of time can be set from 1 to 240 minutes in 1-minute increments.
Important
•
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press to highlight Display Timer and choose if you want the timer to show up
on the screen by pressing
Selection
Always
1 Min/2 Min/3 Min
Never
4. Press to highlight Timer Position and set the timer position by pressing
Top-Left → Bottom-Left → Top-Right → Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
6. To activate the presentation timer, highlight Presentation Timer and press
to select On and press ENTER on the projector or Enter on the remote control.
To cancel the timer, perform the following steps:
1. Go to the Setting > Presentation Timer > Presentation Timer menu and
highlight Off.
/ .
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
/ .
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
22
/ . The length
/
.
/