ViewSonic Pro8600 User Manual page 48

2. If you want to freeze the projected image on the screen, press
movements will be not been seen on the screen until
3. You can choose a capture mode from here.
i. To display a full screen, click FullScreen.
ii. To display a partial screen, click FixedSize. A square appears on your screen.
You can place it where you want to project.
iii. If you wish to change the square, click Alterable.
4. The Basic Setting page allows you to configure vsPresenter.
i. To change the vsPresenter interface language, click the down arrow to reveal a
drop-down list and select a desired language. Click Apply.
ii. Users can change the size parameters of the frame in FixedSize capture mode
by modifying width and height on this page and click Apply to make changes
take effect.
iii. User can use the mirror driver for presenter capture image, if the system has
installed the mirror driver.
iv. To allow notification messages to appear, click Yes. Click Apply.
v. The Software Information is available on this page.
is pressed.
41
. Any further