Allow you to enter the Audio Setting menu.
• Computer 1: Select the audio input for Computer in 1 signal.
• When Audio in 1 is turned on, Audio in 2 and Audio in 3 will turn off
automatically.
• Computer 2: Select the audio input for Computer in 2 signal.
• When Audio in 2 is turned on, Audio in 1 and Audio in 3 will turn off
automatically.
• Video Source: Select the audio input for video source.
• When Audio in 3 is turned on, Audio in 1 and Audio in 2 will turn off
automatically.
• HDMI: Select the audio input for HDMI signal.
• When HDMI is turned on, Audio in 1, Audio in 2 and Audio in 3 will turn off
automatically.
Microphone Volume
Adjust the microphone's volume level.
Speaker Volume
Adjust the projector's volume level.
Mute
Cut off the sound temporarily.
Setting
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in front
of or behind the screen. Invert or reverse the image accordingly.
Signal Type
Specify the source to the Computer in 1/Computer in 2 terminal that you wish to project.
• Auto:Automatically detect the input signal type from Computer in 1 and Computer in
2 terminals.
• RGB:For VGA signal
• YCbCr/YPbPr:For component signal
Power Saving
If the input source is not detected and no operation is performed for a specific period of
time, projector will automatically turn off.
Auto Source
Automatically scan through all the input sources.
ECO Mode
Use this function to dim the projector lamp light output which will lower power consumption
and increase lamp life.
• This function will be unavailable when the DCR function is on.
Filter Mode
Use this function to activate filter mode after the projector is installed an optional filter cover.
28