Table of Contents
Advertisement
Setting the Presentation Timer
The presentation timer can indicate the presentation time on-screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Use the remote control
Presentation Timer menu.
2.
Press [Enter] to show the Presentation Timer page.
3.
Select Timer Period and press / to confirm the duration. Duration can be set to 1
to 5 minutes, with 1 minute increments, or 5 to 240 minutes in 5 minute increments.
Once the timer has been activated, resetting the timer interval will re-activate the timer.
Press and select the Timer Display. Then press / to select whether to display
4.
or hide the on-screen timer.
Selection
Always
1 min/2 min/3 min
Never
5.
Press and select Timer Position, and then press / to set timer location.
Top- Left Bottom Left Top Right Bottom Right
6.
Press to select Timer Counting Direction, then press / to select the required
timer method.
Selection
Count Up
Count Down
To activate Presentation Timer, press , then press / and select Start Counting,
7.
then press [Enter].
8.
A confirmation message will be displayed next. Select Yes and press [Enter] to
confirm the selection. The screen will display the message [Timer is On!]. Once
activated, the timer will start its countdown.
To cancel the timer, perform the following steps:
1.
Enter Basic > Presentation Timer menu.
2.
Select OFF. Press [Enter]. A confirmation message will be displayed afterwards.
3.
Select Yes and press [Enter] to confirm the selection. The screen will display the
message [Timer is Off!].
and enter Presentation Timer menu or enter Basic >
Description
Displays the timer on screen throughout the presentation time.
Display timer on-screen in the last 1 / 2 / 3 minutes.
Hides the timer throughout the presentation time.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
34
Advertisement
Table of Contents
