NetWork
Information
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Brightness, Contrast, Saturation, Color Setting >
Gamma, Overscan, Noise Reduction, Audio Setting, Microphone Volume, Speaker Volume,
Mute, Keystone, Aspect Ratio, Projection, Power Saving, ECO Mode, Filter Mode, Menu
Position, OSD Transparency, Closed Caption, Message, Zoom, DCR and Test Pattern.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.
Wired LAN
Default Gateway
Wireless LAN
Connection Mode
Network Restart
Computer 1, Computer 2,
Input Source
Component, Composite, S-Video,
HDMI, USB A, USB B, LAN
MAC Address
Filter Hours*2
Filter Hours Reset*2
Lamp Hours
Lamp Hours Reset
Factory Default
25
Disconnect, Connect
Status
On, Off
DNS
Apply
Disconnect, Connect
Status
SSID
AP, Infrastructure
Yes, No