ViewSonic VS13647 User Manual
ViewSonic VS13647 User Manual

ViewSonic VS13647 User Manual

Viewsonic projector user manual
Hide thumbs Also See for VS13647:

Advertisement

ViewSonic
Pro8400
DLP Projector
IMPORTANT: Please read this User Guide to obtain important
information on installing and using your product in a safe
manner, as well as registering your product for future service.
Warranty information contained in this User Guide will describe
your limited coverage from ViewSonic Corporation, which is
also found on our web site at http://www.viewsonic.com in
box in the upper right corner of our website.
"Antes de operar su equipo lea cuidadosamente las
instrucciones en este manual"
®
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
-
-
-
-
Model No. : VS13647

Advertisement

Table of Contents
loading

Summary of Contents for ViewSonic VS13647

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in box in the upper right corner of our website. “Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”...
  • Page 2: Compliance Information

    Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3: Important Safety Instructions

    Important Safety Instructions Read these instructions. Keep these instructions. the manufacturer’s instructions. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the replacement of the obsolete outlet. unit.
  • Page 4: Declaration Of Rohs Compliance

    Declaration of RoHS Compliance Technical Adaptation Committee (TAC) as shown below: Substance Cadmium (Cd) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers or more lead). weight. Pro8400 Proposed Maximum Concentration Actual Concentration...
  • Page 5: Copyright Information

    Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ® Product Name: Model Number:...
  • Page 6 Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent signal interference due to voltage fluctuations. Ground ViewSonic Pro8400...
  • Page 7: Table Of Contents

    ... 48 Displaying pictures with a USB storage device ... 53 Maintenance ...57 Cleaning the Lens ... 57 Cleaning the Projector Housing ... 57 Cleaning the Filter Cover ... 57 Replacing the Lamp ... 58 Specifications ...60 ViewSonic Pro8400...
  • Page 8 Dimensions ... 61 Ceiling mount installation ... 61 Appendix ...62 LED Indicator Messages ... 62 Compatibility Modes ... 63 Troubleshooting ... 65 RS-232 Command and Configuration 66 IR Control Code ... 68 ViewSonic Pro8400...
  • Page 9: Introduction

    Less than 1 W power consumption in standby mode The information in this manual is subject to change without notices. The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. ViewSonic Pro8400...
  • Page 10: Package Contents

    Auto Enter Swap Default Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries VGA Cable (D-SUB to D- HDMI Cable ViewSonic DVD Quick Start SUB) Wizard Guide Optional accessories Filter cover RS232 cable RGB to component adapter...
  • Page 11 Save the original shipping carton and Packing material; they will come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was originally packed at the factory. ViewSonic Pro8400...
  • Page 12: Projector Overview

    Projector Overview Front View Lens cap Elevator button Elevator foot Lens cap strap Projection lens Front IR remote control sensor Ventilation holes (intake) ViewSonic Pro8400 Filter cover Speaker Focus ring Zoom ring Control panel Lamp cover...
  • Page 13: Rear View

    Ceiling mount holes (M4*8) Tilt-adjustment feet Security bar This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. ViewSonic Pro8400...
  • Page 14: Using The Product

    ENTER Enter to sub-menu and confirm the menu selection. SOURCE Display the source selection bar. MENU/EXIT Display or exit the on-screen display menus. Power Turn the projector on or off. Right/Panel key Activate panel key lock. ViewSonic Pro8400 /Up, /Down)
  • Page 15: Connection Ports

    For LAN display/network control and web server. HDMI 1 Connect HDMI output from video equipment to this jack. HDMI 2 Connect HDMI output from video equipment to this jack. DC 12V Out 12V DC out MIC in Microphone input jack. ViewSonic Pro8400...
  • Page 16 Connect composite video output from video equipment to this jack. Computer in 2 Connect image input signal (analog RGB or component) to this jack. Computer in 1 Connect image input signal (analog RGB or component) to this jack. ViewSonic Pro8400...
  • Page 17: Remote Control

    Screen function. Light Enable backlight functions of the remote control’s buttons. Compo Display Component video (YPbPr/ YCbCr) signal. ViewSonic Pro8400 Down/ HDMI 2 Display HDMI 2 signal. Switch input source to Computer in 1/ Computer in 2 by sequence. Auto/Enter Resynchronize the projector to the input signal from a computer.
  • Page 18 PIP/POP Switch screen to PIP/POP by sequence. Swap Swap input source in PIP or POP image. ViewSonic Pro8400 Aspect Select the display aspect ratio. RGBCMY Change indivial RGBCMY color (user color setting). Default Restore settings to factory default.
  • Page 19: Installing The Batteries

    Batteries should not be in or near to fire or water, keep batteries in a dark, cool and dry place. If suspect battery leakage, wipe out the leakage and then replace new batteries. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic Pro8400...
  • Page 20: Remote Control Operation

    Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic Pro8400...
  • Page 21: Connection

    The connection illustrations above are for reference only. The rear connecting jacks available on the projector vary with each projector model. For detailed connection methods, see pages 18-21. ViewSonic Pro8400 S-Video cable Composite Video cable Audio cable HDMI cable Microphone 3.5 mini jack cable...
  • Page 22: Connecting A Computer Or Monitor

    Connect the other end of the cable to the Monitor Out socket on the projector. Important The Monitor Out output only works when Computer in 1 or Computer in 2 is made to the projector. ViewSonic Pro8400 ® computers. A Mac adapter is needed if you are “Connecting a computer” on...
  • Page 23: Connecting Video Source Devices

    “Connecting a composite Video source device” on page 21 projector to a composite Video device. ViewSonic Pro8400 for how to connect for how to connect the for how to connect the...
  • Page 24: Connecting A Component Video Source Device

    Also check that the signal cables have been connected correctly. RGB to component adapter (ViewSonic P/N: J2552-0212-00) Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: If so, you can continue with this procedure.
  • Page 25: Connecting A Composite Video Source Device

    You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See “Connecting Video source devices” on page 19 ViewSonic Pro8400 “Connecting Video source devices” on page 19 for details.
  • Page 26 To ensure a quality use of the wireless microphone, it is recommended that your microphone conforms to the specifications listed in the table below. Signal Parameter Microphone Transducer Principle Impedance Frequency response ViewSonic Pro8400 Type Dynamic...
  • Page 27: Operation

    Press again to confirm. When the Power LED begins flashing, the projector has entered stand-by mode. Disconnect the AC power cord from the electrical outlet and the projector. Do not turn on the projector right after power off ViewSonic Pro8400...
  • Page 28: Adjusting The Projector Height

    Adjusting the Projector Zoom and Focus Focus the image by rotating the focus ring. A still image is recommended for focusing. Adjust the image size by sliding the zoom ring. ViewSonic Pro8400 Tilt-adjustment feet Focus ring Elevator foot Elevator button...
  • Page 29: Adjusting Projection Image Size

    This will help you determine the exact mounting position so that it best suits your installation location. ViewSonic Pro8400 Vertical offset Projection distance 16 : 9 Screen (max.
  • Page 30: Locking Control Keys

    Keys on the remote control are still functional when panel key lock is enabled. If you press lock, the projector will still be in locked status the next time it is turned on. ViewSonic Pro8400 Power to turn off the projector without disabling panel key Power. HDMI1...
  • Page 31: Menu Operation

    Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. Video/Audio Microphone Volume ViewSonic Pro8400 Brightest, Standard, Theater, Color Mode Dark Room, User1, User2 Saturation*4 Video Setting Sharpness*5 Tint*6 Color Temp.
  • Page 32 Setting ViewSonic Pro8400 Auto Keystone Keystone -40 - +40 Auto, 4:3, 16:9, Aspect Ratio ANAMORPHIC 1, ANAMORPHIC 2 Front-Table, Front-Ceiling, Rear-Table, Rear-Ceiling Filter Mode*2 High Altitude Quick Power On Quick Power Off DC 12V Trigger Input Password Password Delete Black, Red, Green, Blue,...
  • Page 33 Reduction, Keystone and Filter Mode. *4 Saturation is supported under Component, Video and S-Video modes. *5 Sharpness is supported under HDMI, Component, Video and S-Video modes. *6 Tint is supported under Component, Video and S-Video modes. ViewSonic Pro8400 Wired LAN Default Gateway Wireless LAN...
  • Page 34: How To Operate

    Gamma Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Video/Audio ViewSonic Pro8400 to select any feature in the main menu. select feature setting.
  • Page 35 Adjust the microphone’s volume level. Speaker Volume Adjust the projector’s volume level. Mute Cut off the sound temporarily. Setting Auto Keystone Automatically correct distorted images resulting from an angled projection. Keystone Manually correct distorted images resulting from an angled projection. ViewSonic Pro8400...
  • Page 36 Use this function to activate filter mode after the projector is installed an optional filter cover. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. Quick Power On On: The projector will turn on in 3 seconds. ViewSonic Pro8400...
  • Page 37 DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp life and system noise performance. Test Pattern: Display embedded test pattern. Function ViewSonic Pro8400...
  • Page 38 DNS: Setup DNS server address when DHCP is disable. Apply: Save and execute the wired LAN settings. Wirless LAN Allow you to configure the wireless LAN settings. Status: Display the projector’s status. SSID: Display the projector’s SSID information. ViewSonic Pro8400...
  • Page 39 Equivalent Lamp Hours Reset Reset the lamp Hour to 0 hours. Factory Default Restore settings to factory default. The following settings will still remain: MAC Address, Language, Projection, High Altitude, Filter Mode, Password, Lamp Hours, Filter Hours, Auto Keystone, Keystone. ViewSonic Pro8400...
  • Page 40 Language Select the language used by the on-screen menu. ViewSonic Pro8400...
  • Page 41: Controlling The Projector Through A Lan Environment

    If you are in a non-DHCP environment: Repeat steps 1-4 above. Press to highlight DHCP and press Contact your ITS administrator for information on the IP Address, Subnet Mask, Default Gateway, and DNS settings. ViewSonic Pro8400 Internet IP Router to select On. to select Off.
  • Page 42 If you wish to connect to the projector in its standby mode, be sure you have selected RJ45 and obtained the IP Address, Subnet Mask, Default Gateway, and DNS information when the projector is on. ViewSonic Pro8400...
  • Page 43: Wireless Connection

    Wireless connection ViewSonic wireless dongle To connect to the projector wirelessly, you have to plug a ViewSonic wireless dongle (optional) to the USB Type A connector on the projector, and then only a few OSD configuration steps are required. Make sure the projector is turned on.
  • Page 44 The following diagram describes how to access the Internet in AP and Infrastructure modes. (AP mode) Important If you need more information about AP and Infrastructure modes, please refer to user documentations for Wireless Routers which are usually available on 3C stores. ViewSonic Pro8400 (Infrastructure mode) Internet Internet...
  • Page 45: Controlling The Projector Through A Web Browser

    Enter the address of the projector in the address bar of your browser and press Enter. The main page of the ViewSonic webpage control system appears. To change the language for the web pages, click the down arrow to reveal a drop down list and select a desired language.
  • Page 46 Alert Setup/Mail Setup: Allows you to setup the mail server and send system error messages to your ITS administrator. Network Setup: Provides wired and wireless network settings. Reset to Default: Allows you to restore the device to the factory default settings. ViewSonic Pro8400 “Menu Operation” on page 27 for details.
  • Page 47 The source list varies according to the connectors available on the projector. When you use the projector control panel or remote control to change the OSD menu settings, it may take a while for the web browser to synchronize these changes with the projector. ViewSonic Pro8400...
  • Page 48 To prevent errors, only input the English alphabet and digits on the tools page. After making the adjustments, press the Send button and the data will be saved for the projector. Press Exit to go back to the remote network operation page. ViewSonic Pro8400 viii...
  • Page 49 Please pay attention to the limitation of input length (including space and other punctuation keys) in the list blow: Category Item Crestron Control Projector Network Configuration User Password Admin Password ViewSonic Pro8400 Input Length IP Address IP ID Port Projector Name Location Assigned To...
  • Page 50 You will be able to deliver messages to RoomView software administrators/users who connect to the same local area network. Important Please only deliver the messages in English letters and digits. For more information, visit ViewSonic Pro8400 http://www.crestron.com & www.crestron.com/getroomview. Press Exit to go back to the remote network.
  • Page 51 On the "Edit Room" page, enter the IP Address (or hostname) as shown on the projector's on-screen display (OSD) menu, and "05" for IPID, "41794" for the reserved Crestron control port. About Crestron RoomView setting and command method, please access below website to get RoomView User Guide and more information: http://www.crestron.com/features/ roomview_connected_embedded_projectors_devices/resources.asp ViewSonic Pro8400...
  • Page 52: Displaying Images Through Vspresenter

    Search. iii. You can link to the ViewSonic webpage control system on If you are the first time user, choose your identity as a Normal user or Administrator. Both require no password. But if you choose to be an...
  • Page 53 To display a partial screen, click FixedSize. A square appears on your screen. You can place it where you want to project. iii. If you wish to change the square, click Alterable. The Basic Setting page allows you to configure vsPresenter. ViewSonic Pro8400 . Any further is pressed.
  • Page 54 444 provides better effect but may slow the transport and playing speed. Click Apply after your selections. To adjust the capture rate, move the slide bar. The network bandwidth may also affect the performance. iii. Network port setting for fixed or manual type. ViewSonic Pro8400...
  • Page 55 You are the user of the projector. You are an administrator of the projector. Disconnect ViewSonic Pro8400 Icon Sets a display zone for the projector. Description Disconnects from the projector. Opens the web page of the Network Control.
  • Page 56 To disconnect from the projector(s), click the Disconnect icon. Important Be sure to turn off other virtual network control programs before using vsPresenter. ViewSonic Pro8400...
  • Page 57: Displaying Pictures With A Usb Storage Device

    ENTER or Enter. To obtain more functions, press MENU to open the menu. To leave the menu, press ENTER or Enter again. ViewSonic Pro8400 Maximum pixel size 8000 x 8000 1280 x 800...
  • Page 58 Previous: Selects the previous image. Delay 3/Deplay 4/Deplay 5: Sets the interval between the two images display. Slide Right/Slide Up/Right Down/XLines/YLines/Blocks: Sets the way the slide show is displayed. Repeat On/Off: Sets whether to repeat the slide shows. ViewSonic Pro8400...
  • Page 59 The projector can display the filenames up to 16 characters including the file extension. The application is best to display the filenames in English. If the files are named in other languages, the filenames may not show properly, but the content still can ViewSonic Pro8400...
  • Page 60 : Folder F Response time may vary depending on image contents when switching pages, loading and playing files. ViewSonic Pro8400 File display priority in folder: A > B > C > D > E > F. Folder G: Cannot be displayed because it is in the 4th layer.
  • Page 61: Maintenance

    Make sure the lens is cool before cleaning. Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners. Do not use chemical sprays. Use a soft cloth or lens paper only. ViewSonic Pro8400...
  • Page 62: Replacing The Lamp

    Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health. ViewSonic Pro8400...
  • Page 63 Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. ViewSonic Pro8400...
  • Page 64: Specifications

    AC 100-240 V, 50 - 60 Hz, 3.8A Power consumption 390 W Dimension (W x D x H) 335 x 267 x 132 mm Weight 3.86 kg (8.5 lbs) Note: Design and Specifications are subject to change without prior notice. ViewSonic Pro8400...
  • Page 65: Dimensions

    Dimensions 335 mm (W) x 267 mm (D) x 132 mm (H) Ceiling mount installation ViewSonic Pro8400 64.5 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 84.9 Unit: mm...
  • Page 66: Appendix

    Lamp LED Temp LED Power LED Blue Lamp LED Temp LED Power LED Blue Lamp LED Temp LED ViewSonic Pro8400 Status Meaning Solid Standby mode when green mode is turned on. Flash Standby mode when green mode is turned off. Solid...
  • Page 67: Compatibility Modes

    Mac 13 Mac 16 Mac 19 1080i30 1080i25 480p 576p 720p60 720p50 1080p60 1080p50 ViewSonic Pro8400 Resolution H-Sync [KHz] 640 x 480 24.69 800 x 600 30.99 1024 x 768 39.63 1280 x 1024 1600 x 1200 640 x 480 832 x 624 49.72...
  • Page 68 1920 x 1080 720p 1280 x 720 720p 1280 x 720 576p 720 x 576 576i 720 x 576 480p 720 x 480 480i 720 x 480 ViewSonic Pro8400 H-Sync [KHz] V-Sync [Hz] 67.5 56.3 33.8 28.1 37.5 31.3 15.6 31.5 15.8...
  • Page 69: Troubleshooting

    Aim the remote control at the screen or at the front or back of the projector. Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic Pro8400...
  • Page 70: Rs-232 Command And Configuration

    POWER ON / POWER OFF POWER ON POWER OFF SOURCE SELECT Computer 1 Computer 2 COMPONENT COMPOSITE S-VIDEO HDMI 1 HDMI 2 USB A ViewSonic Pro8400 SHELL 19200 bps 8 bit None 1 bit None BE,EF,10,05,00,C6,FF,11,11,01,00,01,00 BE,EF,02,06,00,6D,D2,34,00,00,00,00,00 BE,EF,02,06,00,BC,D3,35,00,00,00,00,00 BE,EF,02,06,00,8F,D3,36,00,00,00,00,00 BE,EF,02,06,00,5E,D2,37,00,00,00,00,00...
  • Page 71 OTHER FUNCTION DCR ON DCR OFF ECO ON ECO OFF VOLUME INC VOLUME DEC KEYSTONE INC KEYSTONE DEC FACTORY RESET LAMP HOURS RESET FILTER HOURS RESET ViewSonic Pro8400 BE,EF,02,06,00,F4,D2,3D,00,00,00,00,00 BE,EF,02,06,00,8A,DF,63,00,00,00,00,00 BE,EF,02,06,00,C8,D7,01,00,00,00,00,00 BE,EF,02,06,00,FB,D7,02,00,00,00,00,00 BE,EF,02,06,00,2A,D6,03,00,00,00,00,00 BE,EF,02,06,00,9D,D7,04,00,00,00,00,00 BE,EF,02,06,00,4C,D6,05,00,00,00,00,00 BE,EF,02,06,00,E6,D6,0F,00,00,00,00,00 BE,EF,02,06,00,F2,D5,1B,00,00,00,00,00 BE,EF,02,06,00,C7,D2,3E,00,00,00,00,00 BE,EF,02,06,00,16,D3,3F,00,00,00,00,00 BE,EF,02,06,00,D9,D8,40,00,00,00,00,00...
  • Page 72: Ir Control Code

    IR Control Code System Code: 83F4 Format : NEC HDMI1 HDMI2 Compo Video Auto Enter Swap Default ViewSonic Pro8400...
  • Page 73: Customer Support

    Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com...
  • Page 74: Limited Warranty

    VIEWSONIC use, during the warranty period. If a product proves to be defective in material or workmanship a like product. Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty purchase. Limited One (1) year Heavy Usage Warranty: warranty information.
  • Page 75 Any other cause which does not relate to a product defect. number. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. Exclusion of damages: not be liable for: opportunity, loss of goodwill, interference with business relationships, or other commercial loss,...
  • Page 76: Mexico Limited Warranty

    (d) a description of the problem, and (e) the serial number of the product. Exclusion of damages: business relationships, or other commercial loss, even if advised of the possibility of such damages. Any other damages, whether incidental, consequential or otherwise. Pro8400 ® VIEWSONIC PROJECTOR...
  • Page 77 Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Puebla, Pue. (Matriz): Chihuahua Chihuahua, Chih. Distrito Federal: Guerrero Acapulco MERIDA: Tijuana: Pro8400 Villahermosa:...

This manual is also suitable for:

Pro8400

Table of Contents