Installing Optional Hardware; Installing The Floppy Disk Drive - Yamaha Electone STAGEA ELB-01 Owner's Manual

Installing Optional Hardware

Installing the Floppy Disk Drive

The optional UD-FD01 floppy disk drive can be installed
to the bottom of the instrument by using the included
floppy disk drive case and screws. Have a Phillips-head (+)
screwdriver ready.
1
Remove the three backing papers from the
adhesive tape in the case, and fit the floppy
disk drive into the case.
Dual-sided
adhesive tape
2
Fold the USB cable inside the case as
shown.
3
Attach the drive and case assembly to the
right underside of the instrument, using the
included four screws (4 mm x 10 mm).
4
Connect the USB cable to the [USB TO
DEVICE B] terminal.
ELB-01 Owner's Manual 167
10