Selecting Voices With The Voice Buttons; Selecting Voices For Voice Section 1 - Yamaha Electone STAGEA ELB-01 Owner's Manual

3

Selecting Voices with the Voice buttons

Selecting Voices for Voice section 1

Since selection of Voices follows the same procedure throughout all Voice sections
(except Lead Voice), instructions for only the Upper Keyboard Voice 1 of the Voice
section 1 are given here. For details on how to select a Voice of Voice section 2, see page
30.
1
Make sure that the lamp of the Voice section [1] is lit.
If the Voice section [2] lamp is lit instead, press the [VOICE SECTION] button
so that Voice section [1] lights.
Indicates that you can select a Voice for Voice section 1
When the Voice section [1] lamp is lit, you can select a Voice for Voice section 1
(in this case, the Upper Keyboard Voice 1), from the panel's Upper Keyboard
Voice 1/2 section.
The Lead Voice can be selected regardless of whether Voice section [1] or Voice
section [2] is lit.
2
Press one of the Voice buttons in the Upper Keyboard Voice 1/2
section.
For example, if you have pressed the [ORGAN] button, the following display
(Voice Menu) will appear.
<ORGAN>
¿01:Pipe Organ 1
(in this case, Upper Keyboard Voice 1)
¨1
Reference Page
Switching between Voice
section 1 and Voice section
2 (page 29)
HINT
You can select the ideal
Voice by simply pressing the
[A]/ [B]/ [D] buttons when
the Voice menu is displayed.
Each Voice button has so
many Voices that this
function helps you selecting
the Voices.
ELB-01 Owner's Manual
2
25