Yamaha Electone STAGEA ELB-01 Owner's Manual page 31

4
Press one of the Volume buttons of the Upper Keyboard Voice 1/2
section on the panel to increase the Volume level for the Upper
Keyboard Voice 2.
Since the default Volume level for Voice section 2 is set to minimum, the Upper
Keyboard Voice 2, Lower Keyboard Voice 2 and Pedal Voice 2 will produce no
sound even after you select the Voices for Voice section 2. To play the Voices for
Voice section 2, make sure to press the Volume buttons of the selected Voice 1/2
section on the panel to increase the Volume level. When the lamp of the Voice
section [2] is lit, the Volume buttons of the Voice sections (except the Lead
Voice) can be used to set the Volume level specifically for Voice section 2.
Now set the Voices for Lower keyboard Voice 2 and Pedal Voice 2 as you did for Upper
keyboard Voice 2 above.
If you want to turn off the Voices of Voice section 2, set the volume level to minimum
by using the Volume buttons of the selected Voice sections on the panel, or select the
Off status in the Voice Display when the lamp of the Voice section [2] is lit.
About the To Lower function
Voices selected for the Lead Voice, Pedal Voice 1, and Pedal Voice 2 sections can also
be played on the Lower Keyboard when the [TO LOWER] button in each section is
on.
Keep in mind that when [TO LOWER] is on, the Lead Voice and Pedal Voice
cannot be played on the Upper Keyboard and Pedalboard, respectively. Also, Initial
Touch is not effective on Pedal Voices played on the Lower Keyboard.
Reference Page
On/Off status of Voices
(page 28)
ELB-01 Owner's Manual
2
31