Appendix; Installing The Optional Speakers - Yamaha Tyros2 Owner's Manual

Appendix

Installing the Optional Speakers

Make sure that you have all of the parts below, included in the TRS-MS02 speaker package.
Satellite
speakers (2)
1
Turn the Tyros2's power off, and disconnect the AC power cord. Also,
make sure to disconnect the keyboard from any other external devices.
2
Insert the two speaker brackets to the rear panel of the Tyros2.
3
Fasten the satellite speakers to the left and right brackets.
Place the speaker on
the bracket.
4
Use the RCA pin cables to connect the speakers to the respective outputs
on the Tyros2.
Subwoofer Speaker
speaker (1) brackets (2)
Use the out-
side slots
(as shown).
Adjust the direction of the speaker as desired,
then fasten it securely to the bracket.
RCA pin RCA pin/8-pin
cables (2) combination cable (1)
NOTE
• Either bracket can be fastened to
either location.
NOTE
• Either speaker can be placed on
either bracket.
• If you want to change the direction
of the satellite speaker, unfasten it
from the bracket by rotating the
lever, then adjust the speaker
position as desired, and fasten it
to the bracket again.
NOTE
• Either cable can be used for either
location.
219
Tyros2 Owner's Manual