Converting El Format Songs To Elb - Yamaha Electone STAGEA ELB-01 Owner's Manual

6
Reference Page
Installing the Floppy Disk
Drive (page 167)
NOTE
When converting protected
EL data to the ELB format,
make sure to set the write-
protect tab of the EL disk to
the "overwrite" position (tab
closed).
142 ELB-01 Owner's Manual
5
Press the [B] button corresponding to [EXE] (Execute) in the
display.
<CONV>¿EL
<CONV DEST>
¿ ___:new song [EXE]
The new song is displayed as the destination in the floppy disk.
When a new song is not displayed, select a new song by turning the DATA
CONTROL dial or successively pressing the [C] button.
6
Press the [D] button corresponding to [EXE] (Execute) in the
display.
A message appears prompting confirmation of operation. You can cancel the
operation at this point by pressing the [D] button.
7
Press the [C] button corresponding to [Convert] in the display to
start conversion.
After conversion is finished, the LCD returns to the Convert display. The song
converted to EL format is automatically named "EXXX: SONG x" (x indicates
the number).

Converting EL format songs to ELB

You can convert the songs in a floppy disk created with an EL-series Electone, such as
the EL-900, to the ELB-01 format, and save it to a USB flash memory device. The
songs in write-protected or copy-protected media for the EL series can be converted
only one time. To use a floppy disk, you'll need to install the optional UD-FD01 floppy
disk drive. Depending on the original song data, the sound or tempo of the converted
song may differ from the original, and/or the Next Song function of the original song
may not be effective.
Make sure to check the remaining memory of the destination media in advance. If
memory space is insufficient, the Convert operation is not available.
[EXE] ‡
001:SONG 1 ´
‡