On/Off Status Of Voices - Yamaha Electone STAGEA ELB-01 Owner's Manual

Reference Page
Voice Display (page 23)
2
28 ELB-01 Owner's Manual

On/Off status of Voices

You can set the whether the Voice sounds or not by setting the On/Off status in the
Voice display. To call up the Voice display, press the [VOICE DISPLAY] button.
Voice Display (Voice section [1] lit)
Upper Keyboard Voice 1
¨"Strings1Î"Violin3
Ò"Piano1
Lower Keyboard Voice 1
Two different displays are available, depending on whether Voice section 1 or Voice
section 2 is lit. The instructions below use Voice section 1 as an example; however, the
method for changing the On/Off setting is same in both Voice section 1 and Voice
section 2.
On/Off settings:
Press the [A] – [D] buttons corresponding to the items or parameters you want to
change to alternate between On and Off. Selecting Off effectively mutes the sound of
the corresponding Voice, even when the keys are played.
¨'Strings1Î"Violin3
Ò"Piano1
Setting this to Off results in a Volume value of 0. If you increase the Volume by using
the Volume buttons, the On/Off status here changes to On.
The On/Off status for other Voices can be set in the other Voice Displays.
Lead Voice
∏"FingrBs1
Pedal Voice 1
∏"FingrBs1