EFI DocuColor 5252 Supplementary Manual page 80

1 Unused connector
2 Connect to serial port
1 AC adapter
2 Power cord
3 Small connector
C M
OLOR EASUREMENT
For a Mac OS computer, connect the 8-pin mini-DIN plug directly into the serial port of
the computer.
1
2
For Mac OS computers with a USB port (for example, an iMac), you need an adapter
N :
OTE
to connect the DTP41 to your computer. For information about supported adapters, see the
X-Rite, Inc. web site (www.x-rite.com).
5 Use the AC adapter to provide power.
Plug the small connector on the adapter cable into the power input of the DTP41 and plug
the AC adapter into the power cord. Plug the power cord into a wall outlet.
1
3
6 Turn on the computer.
7 Calibrate the DTP41 using ColorWise Pro Tools (see the following section).
8 Calibrate the Fiery EXP6000/EXP5000 using ColorWise Pro Tools and the DTP41
(see page 47).
I
NSTRUMENTS
2
80