EFI DocuColor 5252 Supplementary Manual page 77

1 Connect to computer
2 Unused connector
3 Connect to adapter
4 Square connector
5 Interface cable
1 Unused connector
2 Connect to serial port
C M
OLOR EASUREMENT
3 Attach the connector to the computer.
For a Windows computer, insert the 8-pin mini-DIN end of the interface cable into the 9-pin
DB9 Connector cable adapter. Insert the 9-pin end into the COM1 or COM2 port on the
computer and tighten the screws. If the available port on your computer is 25-pin, you must
use the 8-pin-to-25-pin adapter.
1
2
3
For a Mac OS computer, connect the 8-pin mini-DIN plug directly into the serial port of
the computer.
1
2
N : For Mac OS computers with a USB port, you need an adapter to connect the DTP32
OTE
to your computer. For information about supported adapters, see the X-Rite, Inc. web site
(www.x-rite.com).
I
NSTRUMENTS
4
5
77