EFI DocuColor 5252 Supplementary Manual page 22

C W P T
OLOR ISE RO OOLS
3 Enter the appropriate information for the Fiery EXP6000/EXP5000.
: Type a name for the Fiery EXP6000/EXP5000. It does not have to match the
Nickname
actual server name of the Fiery EXP6000/EXP5000.
The nickname cannot contain the following characters:
N :
OTE
[ ] _ " ' <space> <tab>
: TCP/IP is the only supported network protocol, so no selection is required.
Protocol
: Type the IP address (or DNS or host name) of the Fiery EXP6000/EXP5000.
Server Name
: Type the name of the device the Fiery EXP6000/EXP5000 is connected
New Device
to: or . This device name appears in the Printer Setup section of the
DC6060 DC5252
Configuration page.
N : This term is case-sensitive, type
OTE
4 When you have typed all the information, click Add.
5 With the device name selected in the Devices list, click OK.
The Fiery EXP6000/EXP5000 appears in the list of Available Servers. The first line of the
entry displays the nickname you assigned the Fiery EXP6000/EXP5000, followed by the
protocol. The second line displays the device name.
6 With the device name selected in the list of Available Servers, click Select.
The ColorWise Pro Tools main window appears.
DC6060 or DC5252 exactly as shown.
22