C
ALIBRATION
N
:
When you print the CMYK patches to the digital press, other Fiery EXP6000/
OTE
EXP5000 print options are ignored. To increase the speed and reliability of the calibration,
print your custom calibration page with the appropriate settings for the ColorWise print
options to a PostScript file and download it to the Fiery EXP6000/EXP5000. Retaining this
file in the Hold queue makes the calibration process even faster.
7 Open any output profile with Calibrator.
8 Resave the profile under a new name descriptive of your custom halftone.
9 Use Profile Manager to associate this profile with the proper calibration set.
For information about Profile Manager, see ColorWise Pro Tools Help.
10 Use Calibrator to perform the calibration.
N
:
Do not use the Print button to generate the patch page. Use the custom calibration
OTE
page that you just printed.
For information about calibration procedures, see
page
42.
54