EFI DocuColor 5252 Supplementary Manual page 38

C W P
OLOR ISE RO
• If the Spot-On Color Search dialog box is open, the center patch updates with the
measured values, and the neighbor patches update accordingly.
• If the Set Center Patch Color dialog box is open, the measured values are imported into
the CMYK entry fields.
5 When you are finished taking color measurements, choose Stop from the Instrument menu.
Spot-On closes the connection to the instrument.
Reverting default colors to factory settings
You can revert default colors to their factory default settings. Revert all colors within a default
color group, or revert one or more specific colors within a default color group, so that only
those colors are reset to the factory default settings.
T
O REVERT ALL COLORS WITHIN A DEFAULT COLOR GROUP TO FACTORY DEFAULTS
1 Click the icon to the left of the name of the group that you want to revert.
2 Choose Revert Group from the File menu.
A warning message appears.
3 Click OK.
T
O REVERT SPECIFIC COLORS WITHIN A DEFAULT COLOR GROUP TO FACTORY DEFAULTS
1 Click the icon to the left of the name of the group that contains the colors you want to revert.
2 Select the colors that you want to revert to the factory defaults.
To select more than one color, Shift-click to select an adjacent color or Control-click to select
a nonadjacent color.
3 Choose Revert Factory Color from the File menu.
A warning message appears.
4 Click OK.
Saving changes and exiting Spot-On
To enable your spot color matches for use with the Fiery EXP6000/EXP5000, save your edits
before you exit Spot-On. This ensures that all your changes to Spot-On color definitions are
stored on the Fiery EXP6000/EXP5000 and available for use when printing documents that
contain spot colors.
The following edits do not require saving to take effect:
• Rearranging the priority level of a color group
• Downloading a color group
• Clearing or deleting a color group
T
OOLS
38