Table of Contents
Advertisement
CHAPTER 3: Maintenance Basics
34
Remove the seven system board screws.
10
Lift the system board up and out of the case.
11
Align the new system board on the standoffs and secure it into the
12
computer case with the screws.
If your replacement system board does not include a processor, go to
13
Step
14.
-OR-
If your replacement system board includes a processor, go to
Release the processor from the old system board by pushing down on the
14
lever and then lifting the lever completely up.
Remove the processor from the old system board.
15
Install the processor onto the new system board making sure that Pin 1
16
on the processor (indicated by the silk-screened arrow on the corner of
the processor) aligns with Pin 1 on the processor socket (indicated by the
absence of a pin hole in the processor socket), then return the lever to its
locked position.
Connect the power and data cables using your notes from
17
Screws
Screws
www.gateway.com
Step
17.
Step
9.
Advertisement
Table of Contents
