Table of Contents
Advertisement
CHAPTER 3: Maintenance Basics
30
Remove the screw that secures the front I/O panel board to the computer,
4
then remove the I/O panel board by pushing it toward the back of the
computer.
Disconnect the cable from the old I/O panel board and connect it to the
5
new I/O panel board.
Insert the new I/O panel board into the computer, then replace the screw.
6
Place the front I/O assembly onto the computer, then replace the screw.
7
Replace the front bezel by following the instructions in
8
front bezel" on page
Replace the side panel by following the instructions in
9
panel" on page
15.
14.
www.gateway.com
Screw
"Replacing the
"Replacing the side
Advertisement
Table of Contents
