Clearing Jams Just Beyond Tray 1 - IBM InfoPrint 1634 User Manual

Control panel message Area description
201.xx Paper Jam
202.xx Paper Jam
203.xx Paper Jam
230.xx Paper Jam
241.xx Paper Jam
242.xx Paper Jam
250.xx Paper Jam

Clearing jams just beyond Tray 1

If the paper did not feed from Tray 1 correctly, the jam is in the tray. 241.xx Paper Jam appears.
1
Open Tray 1.
2
Remove the jam.
3
Reinsert the tray.
Jam between an input sensor and the fuser
exit sensor
Jam after the fuser exit sensor
Jam in the duplex page-turnaround area
Jam in the duplex area
Jam in Tray 1
Jam in Tray 2
Jam in the multipurpose feeder
See
"Jams under the photoconductors" on
page 62
"Jams under the fuser or fuser cover" on
page 63
"Jams under and behind the fuser" on
page 64
"Clearing jams between the fuser and the
standard exit bin" on page 64
"Jams under the rollers near the fuser" on
page 65
"Jams in the duplex area" on page 65
"Clearing jams just beyond Tray 1" on
page 59
"Clearing Tray 2 jams" on page 60
"Clearing jams in the multipurpose feeder" on
page 67
59