Power Consumption - IBM InfoPrint 1634 User Manual

Waste from Electrical and Electronic Equipment (WEEE) directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage
the recycling of our products. If you have further questions about recycling options, please contact the place where you bought your printer.

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard-copy output from electronic
inputs.
Copying The product is generating hard-copy output from hard-copy
original documents.
Scanning The product is scanning hard-copy documents.
Ready The product is waiting for a print job.
Power Saver The product is in energy-saving mode.
High Off The product is plugged into a wall outlet, but the power
switch is turned off.
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch
is turned off, and the product is in the lowest possible power
consumption mode.
Off The product is plugged into a wall outlet, but the power
switch is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The
Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically
engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes):
By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver
Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to
a high value maintains a fast response, but uses more energy.
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect
the power supply cord from the wall outlet.
Power consumption (Watts)
410 W
N/A
N/A
120 W
<18 W (multipurpose feeder slot models); <16 W (manual
feeder slot models)
N/A
N/A
.25 W
100
30 minutes