Table of Contents
Advertisement
Note: Store the color supplies in a clean, cool, dark, dry place where the photoconductors will not be touched or scratched.
Configuring the printer for black-only printing
1
Turn the printer off.
2
From the control panel, hold down
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press
until
Color Lock Out appears, and then press
5
Press
until
On appears, and then press
Submitting Selection appears.
6
Press
until
Exit Config Menu appears, and then press
7
Wait until Remove all color supplies appears.
Removing the color supplies
Warning: Do not touch the shiny photoconductor drums.
1
Grasp the handhold.
and
while turning the printer on.
.
51
.
.
Advertisement
Table of Contents
