To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" on page 21.
2. Turn off all peripheral devices connected to the computer. Disconnect the computer's power
cord from the ac power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 20).
5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note
the orientation of the "+" and "-" on the battery.
6. Install the new battery in the connector, orienting the "+" and "-" correctly.
7. Replace the computer cover.
.
Installing and Replacing Desktop Board Components
Figure 20. Removing the Battery
OM11833
41