Removing The Agp Card Retention Mechanism - Intel BOXD850MVSE Product Manual

Removing the AGP Card Retention Mechanism

Follow these instructions to remove the AGP card RM:
1. Using diagonal cutters (A), cut the loop (B) joining the two sides of the AGP card RM (see
Figure 17).
2. Spread the sides of the RM (C) and lift the AGP card RM off of the AGP connector.
✏
NOTE
Once removed using this method, the AGP card RM cannot be reused.
A
c
Figure 17. Removing the AGP Card Retention Mechanism
Installing and Replacing Desktop Board Components
B
c
OM10593
35