How To Configure Wpa2-Psk - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual
Wireless access point 802.11g
Hide thumbs
Also See for WG302 - 802.11g ProSafe Wireless Access Point:
- Reference manual (112 pages) ,
- Configuration (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Click WEP/WPA Settings in the Security menu.
5.
Figure 3-16: WEP/WPA Settings menu
Choose WPA2 with Radius from the list.
6.
Click Apply to save your settings.
7.
How to Configure WPA2-PSK
Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the
client. Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2-PSK, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
3-28
http://192.168.0.229
with the default user name of
Basic Installation and Configuration
July 2005 v3.0
Advertisement
Table of Contents
