Using The Reset Button To Restore Factory Default Settings - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual
Wireless access point 802.11g
Hide thumbs
Also See for WG302 - 802.11g ProSafe Wireless Access Point:
- Reference manual (112 pages) ,
- Configuration (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Using the Reset Button to Restore Factory Default Settings
The Reset button (see
•
Reboot. When pressed and released quickly, the WG302 will reboot (restart).
•
Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL
settings to the factory default values.
To clear all data and restore the factory default values:
Power off the WG302 and power it back on.
1.
Use something with a small point, such as a pen, to press the Reset button in and hold it in for
2.
at least 5 seconds.
Release the Reset button.
3.
The factory default configuration has now been restored, and the WG302 is ready for use.
6-4
"WG302 rear panel" on page
July 2005 v3.0
2-7) has two functions:
Troubleshooting
Advertisement
Table of Contents
