NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 45

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Click Radius Server Settings in the Security menu.
2.
Figure 3-12: Radius Server Settings
Enter the Radius settings.
3.
• Authentication/Access Control Radius Server Configuration: This configuration is
required for authentication using Radius. IP Address, Port No. and Shared Secret is
required for communication with Radius Server. A Secondary Radius Server can be
configured which is used on failure on Primary Radius Server
• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
• Port Number: Port number of the Radius Server. The default is 1812.
Basic Installation and Configuration
July 2005 v3.0
3-23