Table of Contents
Advertisement
B. Setting up MENU 2 OF 3 in
MULTISCREEN mode
MENU 2 OF 3 in the MULTISCR mode is the same
as in the MULTIPLEX mode. See page 10 for the
settings and procedures of the MENU 2 OF 3.
C. Setting up MENU 3 OF 3 in
MULTISCREEN mode
1. BORDER
This item is the same as in MENU 3 OF 3 in the
MULTIPLEX mode. See page 11 for the settings
and procedures.
2. AUTO SKIP
This item is the same as in MENU 3 OF 3 in the
MULTIPLEX mode. See page 11 for the settings
and procedures.
3. SEQUENCE SETUP
This item is the same as in MENU 3 OF 3 in the
MULTIPLEX mode. See page 12 for the settings
and procedures.
4. START SCREEN
This item is the same as in MENU 3 OF 3 in MULTI-
PLEX mode, although the parameters are different.
1. Move the cursor to the START SCREEN para-
meter.
2. Select a display pattern for your startup screen.
FULL: A single spot picture is displayed.
QUAD: Four pictures are displayed on a screen
divided into four segments.
3x3: Nine camera pictures are displayed on a
screen divided into nine segments.
4x4: Sixteen camera pictures are displayed on
a screen divided into sixteen segments.
1-SEQ: A sequence of a single spot picture is
displayed.
4-SEQ: Sequences of pictures from four cam-
eras are displayed on a screen divided into
four segments.
5. SYSTEM MODE
See "Selecting the system mode" on page 7 for set-
tings and procedures.
-14-
Advertisement
Table of Contents
