Table of Contents
Advertisement
OPERATION
Before starting operation, set up the items in MENU 1-3
OF 3.
Set SYSTEM MODE in MENU 3 OF 3 to MULTIPLEX or
MULTISCR depending on your specific needs.
MULTIPLEX Mode
Select this mode to monitor camera pictures or play-
back pictures.
The operations enabled in MULTIPLEX mode are
described below.
Monitoring the Camera Picture
Caution: Set the time lapse VTR to the stop mode or
recording mode.
1. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
MODE
SELECT
CAMERA
SELECT
2. Press button 8 (CAMERA/VTR). The CAMERA / VTR
indicator goes off.
CAMERA/VTR
8
3. Press button 16 (STILL ON). The STILL ON indicator
goes off.
16
STILL ON
A. Single Spot Picture
1. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
2. Press one of the camera selection buttons for dis-
play on the monitor.
The LED on the selected button lights and the
selected camera picture appears on the monitor.
B. Single Spot Picture Sequences
1. Set the MODE SELECT / CAMERA SELECT switch
to CAMERA SELECT.
2. Press the SEQUENCE / ALARM RESET button.
A sequence of single pictures is displayed in the
order and dwell time selected for the SEQUENCE
SETUP parameter in MENU 3 OF 3.
Example of single spot picture sequence
3. To cancel the sequence, press the desired camera
selection button.
The selected camera picture appears in spot on the
monitor.
-15-
ENTRANCE
Camera Picture
Camera 3 Picture
Camera 6 Picture
Advertisement
Table of Contents
