Setting Up The Menus - Panasonic WJ-MS424 Operating Instructions Manual

SETTING UP THE MENUS

Before the Settings
1. Confirm that the cameras and peripherals are con-
nected correctly and firmly.
2. Turn on the power of this unit and connected
peripherals.
1. Displaying the Menus
Press the MENU button for 2 seconds or more.
The MAIN menu appears.
ALARM RESET
ALARM QUAD/SEQ
1
ESC
SYSTEM SETUP *
ALARM BUZZER
ALARM OUT
ALARM AUTO RESET
SEQ SETUP *
TITLE SETUP *
You can setup the following items:
• SYSTEM SETUP
• ALARM BUZZER
• ALARM OUT
• ALARM AUTO RESET
• SEQ SETUP
• TITLE SETUP
See the following pages for details about the func-
tions and settings.
VIDEO SELECT
MENU
2 3 4
+
–
CURSOR SELECT
** MAIN **
2SEC
2SEC
OFF
2. How to Operate the Menus
To select the desired item, press the CURSOR (4,
5) buttons. Each time you press a button, the cur-
sor moves to the next (5) or previous (4) item.
To select the desired parameter of the selected
item, press the SELECT (–, +) buttons.
Note:
Some items have a setting menu (The "
indicates that a setting menu exists, for exam-
ple, SYSTEM SETUP.), press the SELECT (–, +)
buttons to select ON for its parameter. The set-
ting menu of the selected item appears.
Precaution:
Entering the setup menu is not possible while
the ALARM LED is flashing. Make sure the
alarm mode is canceled. To cancel the alarm
mode, press the ALARM RESET button.
All Reset Operation
All reset allows you to reset all setup menu items to
the factory settings if you are unsure about the cor-
rect settings.
Proceed as follows:
1. Turn the power of this unit off.
2. Keep holding down the CURSOR button (5),
the SELECT button (+), and the MENU button
simultaneously, and press the POWER button.
The buzzer beeps when all settings are reset to
the factory settings.
-6-
1 2
3 4
– +
* " mark