Voice Mail Access Number; Enable Shared Call - Panasonic KX-TGP500B04 Administrator's Manual

3.7.3 Call Control [Line 1]–[Line 8]
Value Range
Default Value
Configuration File Reference

Voice Mail Access Number

Description
Value Range
Default Value
Configuration File Reference

Enable Shared Call

Description
Value Range
Default Value
Configuration File Reference
108 Administrator Guide
•
Yes
•
No
Note
•
If you select [Yes], the conversation cannot be interrupted by
another handset or base unit. If you select [No], the
conversation can be interrupted by another handset or base
unit.
Yes
PRIVACY_MODE_[1–8] (Page 179)
Specifies the phone number used to access the voice mail server.
Note
•
Your phone system must support voice mail.
Max. 24 characters (consisting of 0–9, *, and #)
Note
•
No other characters are allowed.
Not stored.
VM_NUMBER_[1–8] (Page 177)
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE_[1–8] (Page 178)
Document Version 2010-08