Security; Enable Ssaf (Sip Source Address Filter); Voip Settings; Rtp Settings - Panasonic KX-TGP500B04 Administrator's Manual

3.6.2.12 Security

Enable SSAF (SIP Source Address Filter)

Description
Value Range
Default Value
Configuration File Reference

3.6.3 VoIP Settings

This screen allows you to change the VoIP settings that are common to all lines.

3.6.3.1 RTP Settings

RTP Packet Time

Description
Document Version 2010-08
Selects whether to enable SSAF (SIP Source Address Filter) for the
SIP servers (registrar server, proxy server, and presence server).
•
Yes
•
No
Note
•
If you select [Yes], the unit receives SIP messages only from
the source addresses stored in the SIP servers (registrar
server, proxy server, and presence server), and not from other
addresses. However, if [Outbound Proxy Server Address] in
3.6.2.3 Outbound Proxy Server is specified, the unit also
receives SIP messages from the source address stored in the
SIP outbound proxy server.
No
SIP_DETECT_SSAF_[1–8] (Page 197)
Selects the interval, in milliseconds, between transmissions of RTP
packets.
3.6.3 VoIP Settings
Administrator Guide 93