3.8 Maintenance
This section provides detailed descriptions about all the settings classified under the [Maintenance] tab.
3.8.1 Firmware Maintenance
This screen allows you to perform firmware updates automatically or manually.
3.8.1.1 Firmware Maintenance
Enable Firmware Update
Description
Value Range
Default Value
Configuration File Reference
Update Type
Description
Document Version
2010-08
Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
•
Changing this setting may require restarting the unit.
•
Local firmware updates from the Web user interface (® see
3.8.2 Local Firmware Update) can be performed regardless
of this setting.
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 143)
Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
3.8.1 Firmware Maintenance
Administrator Guide
121