Value Range
Default Value
Configuration File Reference
Voice Mail Access Number
Description
Value Range
Default Value
Configuration File Reference
Enable Shared Call
Description
Value Range
Default Value
Configuration File Reference
Document Version
2013-02
•
Yes
•
No
Note
•
If you select [Yes], the conversation cannot be interrupted by
another handset or base unit. If you select [No], the
conversation can be interrupted by another handset or base
unit.
Yes
PRIVACY_MODE_[1–8] (Page 196)
Specifies the phone number used to access the voice mail server.
Note
•
Your phone system must support voice mail.
Max. 24 characters (consisting of 0–9, *, and #)
Note
•
No other characters are allowed.
Not stored.
VM_NUMBER_[1–8] (Page 193)
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE_[1–8] (Page 195)
3.7.3 Call Control [Line 1]–[Line 8]
Administrator Guide
111