Table of Contents
Advertisement
TELEPHONE OPERATION
Answering a Call
Press P on the handset. The
Ending a Call
Press P on the handset
— OR —
Place the handset in the cradle.
Redial
The last number dialed on this phone (up to 24 digits) is stored in redial
memory until you dial another number.
Press P.
1
2
Wait for the dial tone and for the
3
When you hear a dial tone, use the softkey to select REDIAL.
(REDIAL does not appear on the screen if there is no number in
redial memory.)
Handset Volume
The handset volume can be set to five different levels. Each time you press
V, the level of what you hear through the handset changes. When
you reach the highest level, you'll hear a beep. Changing this setting does
not affect what the other party hears.
Temporary Tone
NOTE: If you have touch tone service, you don't need to use the
Temporary Tone feature.
If you have dial pulse (rotary) service, this feature allows you to enter codes
or tones needed to operate answering machines, or use electronic banking
services, calling cards, and other special services. This feature will operate
most special services; however, some services may actually require a touch
tone line. To be sure, ask the company that provides the special service.
1
Dial the call, then press *. Any buttons pressed after this send
tone signals.
2
When you hang up or press
returns to dial pulse (rotary) dialing.
At the Handset
appears and the call is connected.
to appear.
, the phone automatically
19
Advertisement
Table of Contents
