Unformatted Flash Detected; Standard Network Software Error; Serial Option <X> Error; Network <X> Software Error - Dell 5330 User Manual

53 Unformatted flash detected

Try one or more of the following:
Press the arrow buttons until
•
continue printing.
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
•
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
•
and host computer.
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
•
54 Network <x> software error
Try one or more of the following:
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
•

54 Standard network software error

Try one or more of the following:
Press the arrow buttons until
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
•
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Understanding printer messages
159
to stop the defragment operation and
to continue printing.
to continue printing.
to continue printing.