Menu item
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Brightness
-6 to +6
Contrast
0–5
Utilities menu
Menu item
Remove Held Jobs
Confidential
Held
Not Restored
All
Format Flash
Yes
No
Description
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
Off is the factory default setting.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
•
printer IP address in a browser window.
Adjusts the gray value of printed output
Note: Auto is the factory default setting.
Adjusts or darkens printed output and conserves toner
Notes:
0 is the factory default setting.
•
A negative value will darken text, images, and graphics. A positive value will
•
lighten them and conserve toner.
Adjusts the degree of difference between levels of gray in printed output
Notes:
0 is the factory default setting.
•
Higher settings show more difference between levels of gray.
•
Description
Removes confidential and held jobs from the printer hard disk
Notes:
Selecting a setting affects only print jobs that are resident in the printer.
•
Bookmarks, jobs on flash drives, and other types of held jobs are not affected.
Selecting Not Restored removes all Print and Hold jobs that were not restored
•
from the disk.
Formats the flash memory. Flash memory refers to the memory added by installing
a flash memory option card in the printer.
Warning—Potential Damage: Do not turn off the printer while the flash memory
is formatting.
Notes:
A flash memory option card must be installed in the printer and operating
•
properly for this menu item to be available. The flash memory option card must
not be Read/Write or Write protected.
Selecting Yes deletes all data stored in flash memory.
•
No cancels the format request.
•
Understanding printer menus
132