Network Buffer; Job Buffering - Dell 5330 User Manual

Mono laser printer
Hide thumbs Also See for 5330:
Table of Contents

Advertisement

Menu item

Network Buffer

Auto
3K to <maximum size allowed>

Job Buffering

Off
On
Auto
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink
Description
Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1-K increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Network Buffer, disable or reduce
the size of the parallel, serial, and USB buffers.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Temporarily stores jobs on the printer hard disk before printing. This menu only
appears if a formatted disk is installed.
Notes:
Off is the factory default setting.
The On value buffers jobs on the printer hard disk. This menu selection appears
only when a formatted disk is installed and is not defective.
The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
For descriptions and settings of the network setup menus, see the following:
"Network Reports menu" on page 108
"Network Card menu" on page 108
"TCP/IP menu" on page 108
"IPv6 menu" on page 110
"Wireless menu" on page 110
"AppleTalk menu" on page 111
"NetWare menu" on page 111
"LexLink menu" on page 112
Note: The Wireless menu appears only when the printer is connected to a wireless
network.
Understanding printer menus
107

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents