Checking The Status Of Supplies; Checking The Status Of Supplies From The Printer Control Panel; Checking The Status Of Supplies From A Network Computer; Ordering Supplies - Dell 5330 User Manual

Mono laser printer
Hide thumbs Also See for 5330:
Table of Contents

Advertisement

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press the arrow buttons until
.
3
Press the arrow buttons until
The status of each supply appears.

Checking the status of supplies from a network computer

Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies, contact the place where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter- or A4-size plain paper.

Ordering print cartridges

When 88 Cartridge low appears or when the print becomes faded:
1
Remove the print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3
Reinsert the cartridge and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
View supplies appears, and then press
Maintaining the printer
165
Status/Supplies appears, and then press
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents