Unformatted Flash Detected; Standard Network Software Error; Unsupported Option In Slot <X; Standard Usb Port Disabled - Dell 5230 User Manual

53 Unformatted flash detected

Try one or more of the following:
•
Press the up or down arrow button until
operation and continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Standard network software error

Try one or more of the following:
•
Press the up or down arrow button until
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.

56 Standard USB port disabled

Try one or more of the following:
•
Press the up or down arrow button until
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.

56 Standard parallel port disabled

Try one or more of the following:
•
Press the up or down arrow button until
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.

58 Too many disks installed

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Troubleshooting
165
to stop the defragment
to clear the message
to clear the message.
to clear the message.