Konica Minolta bizhub 36 User Manual page 56

6.2 Selecting and connecting a printer
5
From the [Printer Name] list, select the desired Bonjour-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
% To check the printer name, select [Network] - [Bonjour Setting] in Administrator mode of the Page-
Scope Web Connection. In the default setting, the contents enclosed in parentheses ( ) suffixed in
[Bonjour Name] correspond to the low-order three bytes of the MAC address (HW Address). The
following window shows an example where the printer name is changed to "Printer Name(Bonjour)".
% After the printer driver is selected, go to Step 7.
% If an incorrect printer driver is selected, go to Step 6.
6
Select the desired printer driver manually.
% When OS X 10.6/10.7 is used, select [Select printer software...] from [Print Using:], and then select
the printer driver of the desired model name from the list that is displayed in another window.
% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select [KONICA MINOLTA] from the [Print Using:], and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the [Print & Fax] or the [Print & Scan], the setting procedure
is completed.
% If the [Installable Options] window appears, proceed to change the option settings as necessary.
For details, refer to page 11-3.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
bizhub 42/36
6
6-5