Finish] Tab - Konica Minolta bizhub 36 User Manual
Bizhub 36/42 print operations user guide
Hide thumbs
Also See for bizhub 36:
- User manual (284 pages) ,
- Setup instructions (23 pages) ,
- Information sheet (12 pages)
Table of Contents
Advertisement
10.4
Parameter details
Function Name
[Image Shift Set-
tings...]
Reference
-
The options "2 e 2, 3 e 3 and 4 e 4" for [Combination], which are for printing a sheet of original onto
multiple sheets of paper, are available only for the PCL driver.
-
The [Skip Blank Pages] function is available for the PCL/XPS drivers.
-
The positions of binding margins vary according to the [Binding Position] setting.
10.4.5
[Finish] tab
Function Name
[Staple]
Reference
-
The [Staple] function is available only if the optional Finisher FS-529 is installed.
bizhub 42/36
Option
[Unit]
[Front Side]/[Back Side]
Option
ON/OFF, Left Cor-
ner/Right Corner/2 Posi-
tion (Left)/2 Position
(Right)/2 Position (Top)
Description
Select a unit to be used for specifying the size.
Specify the shift direction and values.
Specify the print position of a document in increments
of 0.1 mm or 0.01 inch.
Description
Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.
10
10-14
Advertisement
Table of Contents
